LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2000 >> Century Custom >> Repair and Diagnosis >> External Pages >> Different car >> Section 620 (Power Seat System) >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the heated seat module under the seat.
  2. Connect the electric connectors.
    Fig 1: Connecting Electric Connectors
    G01833242Courtesy of GENERAL MOTORS CORP.
  3. Install the tie straps on each side of the module.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the front bucket seat adjuster-to-floor pan bolts.

    Tighten 

    Tighten the front bucket seat adjuster-to-floor pan bolts to 42 N.m (31 lb ft).

  5. Move the seat to its original position.
    Fig 2: Installing Tie Straps On Each Side Of Module
    G01833243Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals