Rear Integration Module Replacement

REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the rear seat belt buckle anchor bolts.
3. Remove the rear seat back.
4. Move the rear seat back insulator aside.
5. Remove the push pin retainers (1).
6. Disconnect the rear integration module (RIM) electrical connectors (3).
7. Remove the RIM (2).

INSTALLATION PROCEDURE
1. Install the RIM (2).
2. Connect the RIM electrical connectors (3).
3. Install the RIM (2) with the push pin retainers (1).
4. Reposition the rear seat back insulator.
5. Install the rear seat back.
6. Install the rear seat belt buckle anchor bolts.
7. Install the rear seat cushion.
8. Reprogram the RIM. Programming and Relearning