LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2002 >> Regal GS >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System >> Repair Instructions >> Coolant Level Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Lubricate the O-ring seal with coolant.
  2. Place the snap clip leg in place.
  3. Install the coolant level sensor.
  4. Connect the coolant level sensor electrical connector to the coolant level sensor.
  5. Fill the cooling system. Refer to Draining and Filling Cooling System 
  6. Install the battery.
    Fig 1: Coolant Level Sensor
    G01764759Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals