LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2003 >> Century Custom >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Engine Controls 3.8L (Introduction, Service & Replacement)) >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2004 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Intake Air Temperature Sensor Components
    GM760425Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor electrical connector (3).
  2. Remove the IAT sensor with a twisting and pulling motion.
  3. Loosen the air cleaner intake duct clamp.
  4. Remove the air cleaner intake duct from the air cleaner cover.
  5. Remove the air cleaner intake duct from the throttle body.
scientia non olet · About LEMON Manuals