Removal Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAF/IAT Sensor & Air Cleaner Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor connector.
Loosen the clamp securing the MAF/IAT sensor to the air cleaner assembly.
Remove the MAF/IAT sensor.

Fig 2: Air Cleaner Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner housing fasteners.
Remove the air cleaner assembly.