Installation Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Sender Assembly

Courtesy of GENERAL MOTORS CORP.

Slide the fuel lever sensor (3) onto the reservoir until the retaining tabs snap into place.

Fig 2: Connecting Fuel Level Sensor Electrical Connectors To Module Connector

Courtesy of GENERAL MOTORS CORP.

Connect the fuel level sensor electrical connector (1) to the module connector.
Install the fuel sender. Refer to Fuel Sender Assembly Replacement .