Installation Procedure

WARNING: This page is about a different car, the 2005 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: TAC Module Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the TAC module electrical connectors to the TAC module.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the TAC module onto the studs and install the mounting nuts.
Tighten: Tighten the TAC mounting nuts to 9 N.m (80 lb in).
Install the left hand corner brace.
Tighten: Tighten the corner brace bolts to 25 N.m (18 lb ft).