LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2005 >> Century Custom >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Introduction >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: Locating Air Cleaner Intake Duct Components
    GM811623Courtesy of GENERAL MOTORS CORP.
  1. Loosen the air cleaner intake duct clamps (2,6).
  2. Remove the PCV tube (4) from the air cleaner intake duct.
  3. Disconnect the intake air temperature (IAT) sensor electrical connector (3).
  4. Disconnect the mass air flow (MAF) sensor electrical connector (5).
  5. Remove the air cleaner intake duct from the air cleaner assembly (8) and the throttle body.
  6. Loosen the clamp on the MAF sensor and remove the air cleaner intake duct from the MAF sensor (7).
  7. If replacing the air cleaner intake duct, remove the IAT sensor (1) with a twisting and pulling motion.
scientia non olet · About LEMON Manuals