Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Accelerator Cable Bracket Retaining Nuts and Bolts	16 N.m	12 lb ft
Air Cleaner Upper and Lower Housing Screws	4 N.m	35 lb in
Air Cleaner Intake Duct Clamp	2 N.m	18 lb in
Camshaft Position (CMP) Sensor Retaining Bolt	10 N.m	89 lb in
Crankshaft Position (CKP) Sensor Bolts	30 N.m	22 lb ft
Exhaust Gas Recirculation (EGR) Valve Inlet Pipe Bolt	50 N.m	37 lb ft
EGR Valve Inlet Pipe Stud	50 N.m	37 lb ft
EGR Valve Inlet Pipe to Exhaust Manifold Bolt	29 N.m	21 lb ft
EGR Valve Outlet Pipe to Inlet Pipe Nut	29 N.m	21 lb ft
EGR Valve Outlet Pipe to Intake Manifold Bolt	29 N.m	21 lb ft
EGR Valve Retaining Nuts	30 N.m	22 lb ft
Engine Coolant Temperature (ECT) Sensor	20 N.m	15 lb ft
Evaporative Emission (EVAP) Canister Bracket Nuts	6 N.m	53 lb in
Evaporative Emission (EVAP) Canister Vent Valve Bolt	6 N.m	53 lb in
Fuel Rail Hold Down Bolts	10 N.m	89 lb in
Fuel Rail Hold-Down Nuts	10 N.m	89 lb in
Fuel Sender Access Panel Bolts	2 N.m	18 lb in
Fuel Tank Filler Pipe Ground Strap Screw	9 N.m	80 lb in
Fuel Tank Filler Pipe Hose Clamp	3.5 N.m	31 lb in
Fuel Tank Retaining Strap Bolts	42 N.m	31 lb ft
Heated Oxygen Sensors (HO2S)	41 N.m	30 lb ft
Idle Air Control (IAC) Valve Attaching Screws	3 N.m	27 lb in
Ignition Coil to Ignition Control Module Screws	4.5 N.m	40 lb in
Ignition Control Module (ICM) 14-Way Connector To Module Bolt	2.1 N.m	19 lb in
In-Line Fuel Filter Outlet Nut	30 N.m	22 lb ft
Intake Air Duct Clamps	2 N.m	18 lb in
Knock Sensor (KS)	19 N.m	14 lb in
Knock Sensor Heat Shield Bolts	60 N.m	44 lb ft
Mass Air Flow (MAF) Sensor Attaching Screws	3 N.m	27 lb in
Powertrain control module (PCM) harness Connector to PCM	8 N.m	71 lb in
Spark Plug (Initial Installation)	27 N.m	20 lb ft
Spark Plug (Reinstallation)	15 N.m	11 lb ft
Throttle Body Retaining Nuts	10 N.m	89 lb in
Throttle Body Support Bracket Fasteners	10 N.m	89 lb in
Throttle Position (TP) Sensor Screws	2 N.m	18 lb in