Digital Radio Receiver Replacement

Fig 1: Identifying Digital Radio Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the left rear quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
1	Digital Radio Receiver Nuts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in) Tip: The nuts only need to be loosened enough so that the receiver can be moved so that the nuts will fit through the keyhole slot to remove.
2	Digital Radio Receiver Assembly Tip: Disconnect the antenna cable. Reprogram the digital radio receiver after installation. Refer to Control Module References .