LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Rendezvous CX >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry System And Remote Functions >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Upper I/P Trim Panel Location View
    GM629215Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Position the remote control door lock receiver to the defroster air duct.
  1. Install the remote control door lock receiver (2).
  2. Engage the remote control door lock receiver retainers.
  3. Connect the remote control door lock receiver electrical connector (1).
  4. Install the upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement (Rendezvous) .
  5. If a new remote control door lock receiver is being installed, program the transmitter. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals