LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2007 >> Rendezvous CX >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Aligning Second Row Seats Forward
    GM786757Courtesy of GENERAL MOTORS CORP.
  1. Roll the second row seats forward.
  2. Fold the third row seat down.
    3. Fig 2: Identifying Guide Loop Covers From LH Rear Seat Belt
    GM786759Courtesy of GENERAL MOTORS CORP.
  3. Open the guide loop covers from the left rear seat belt.
    4. Fig 3: Locating Guide Loop Bolt
    GM786753Courtesy of GENERAL MOTORS CORP.
  4. Remove the guide loop bolts from the second and from the third row seat belts.
    5. Fig 4: View Of Upper Trim From Second & Third Row Pillars
    GM786752Courtesy of GENERAL MOTORS CORP.
  5. Remove the upper trim from the second and third row pillars.
  6. Remove the storage compartment. Refer to Storage Compartment Replacement - Rear (Rendezvous) .
    7. Fig 5: Identifying Rear Liftgate Sill
    GM786746Courtesy of GENERAL MOTORS CORP.
  7. Remove the rear liftgate sill.
  8. Remove the cargo tie-down loops from the rear quarter trim.
    9. Fig 6: View Of Rear Object Alarm Detection Module
    GM785378Courtesy of GENERAL MOTORS CORP.
  9. Pull the top of the quarter trim loose to gain access to the bolts that secure the rear object alarm detection module.
  10. Remove the bolts.
  11. Remove the electrical connector to the module.
  12. Remove the rear object alarm detection module.
scientia non olet · About LEMON Manuals