Installation Procedure

Fig 1: Identifying Theft Deterrent Control Module

Courtesy of GENERAL MOTORS CORP.

Install the theft deterrent module onto the ignition lock cylinder case assembly.

CAUTION: Refer to SIR Inflator Module Coil Caution.

Connect the connector to the theft deterrent module.
If necessary, connect the connector to the ignition lock cylinder case.
Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling .