Side Object Sensor Module Scan Tool Information
WARNING: This page is about a different car, the 2010 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
Side Object Sensor Module Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Left Side Object Detection Sensor Status | - | Varies | The scan tool displays Standby, Off, Disabled, Standby, Reporting, Not reporting or Sensors obstructed. This is the state of the left side object detection sensor. |
| Object Detected in Alert Zone | - | Varies | The scan tool displays Yes or No. Yes is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 1 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 2 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 3 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 4 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 5 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 6 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 7 Alert Zone | - | Varies | The scan tool displays Zone Clear or Object Detected. Object Detected is displayed if there is an object within the measuring range of the side object detection sensors. |
| Radar Beam 1 Distance to Object | - | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Radar Beam 2 Distance to Object | - | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Radar Beam 3 Distance to Object | - | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Radar Beam 4 Distance to Object | - | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Radar Beam 5 Distance to Object | Parking assist switch released | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Radar Beam 6 Distance to Object | Parking assist ON | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Radar Beam 7 Distance to Object | - | 0-500 cm (0-197 in) | The scan tool displays the distance between the side object detection sensor and the object. |
| Right Side Object Detection Sensor Status | - | Varies | The scan tool displays Standby, Off, Disabled, Standby, Reporting, Not reporting or Sensors obstructed. This is the state of the right side object detection sensor. |
| Side Object Detection Display Message History 1-16 | - | Varies | The scan tool displays enabled, enabled by turn signal, disabled, radar needs cleaning, service required or temporarily unavailable. This is the state of the side object detection display message history 1-16. |
Side Object Sensor Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Object Detection Alert Indicators | The side object sensor module illuminates the indicators in the outside rearview mirrors when commanded from the scan tool. |
| Reset History Buffer | The side object sensor module clears the side object detection display message history when commanded from the scan tool. |