Side Object Sensor Replacement

WARNING: This page is about a different car, the 2010 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Side Object Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
1	Side Object Sensor Assembly Procedure Disconnect the side object sensor electrical connector. Release the locking retainer from the side object sensor bracket.

Callout

Component Name

Preliminary Procedure:
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

Side Object Sensor Assembly

Procedure

Disconnect the side object sensor electrical connector.
Release the locking retainer from the side object sensor bracket.