LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Electronic Brake Control Module Programming and Setup >> Electronic Brake Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Brake Control Module Replacement

If the electronic brake control module (EBCM) needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Electronic Brake Control Module-Programming and follow the on-screen instructions.
  3. Perform the SPS function Electronic Brake Control Module-Setup and follow the on-screen instructions. Setup and follow the on-screen instructions.
  4. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals