TCM Reprogramming
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- If the TCM needs to be reprogrammed. Refer to Service Programming System (SPS) .
- Perform the Transmission Adaptive Values Learn. Refer to Transmission Adaptive Values Learn .
- Turn the ignition OFF for 30 seconds.
- Turn the ignition ON with the engine OFF.
- Use the scan tool in order to retrieve history DTCs from all modules.
- Clear all history DTCs.
NOTE:
After programming, perform the following to avoid future misdiagnosis: