LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Programming And Setup - All Systems) >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Programming and Setup >> Sensing and Diagnostic Module Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensing and Diagnostic Module Setup

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

The replacement of some components will require a setup procedure for complete repair. The SDM Setup Procedure must be performed if any of the following components are replaced:

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Inflatable Restraint Sensing and Diagnostic Module Setup and follow the on-screen instructions.
  3. Clear any DTCs after completing the Setup procedure.
scientia non olet · About LEMON Manuals