Wiper Park Circuit Test
WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the M75 windshield wiper motor.
- Ignition ON, test for B+ between signal circuit terminal C and ground.
- If not the specified value, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, test or replace the K9 BCM.
- If the circuit tests normal, test or replace the M75 windshield wiper motor.