LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2012 >> Verano >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Battery Negative Cable & Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
  1. Install the current sensor (2) to the battery negative cable (1).
    2. Fig 2: Wiring Harness Current Sensor Plug
    GM2027817Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery negative cable (1).
  3. Install the ground cable (3).
    4. CAUTION:

    Refer to Fastener Caution .

  4. Install the battery ground cable to the battery negative cable nut (2) and tighten to 9 N.m (80 lb in).
  5. Install the current sensor (5) at the battery tray.
  6. Connect the wiring harness current sensor plug (4).
    7. Fig 3: Battery Negative Cable & Battery Ground Cable Nut
    GM2027762Courtesy of GENERAL MOTORS COMPANY
  7. Install the battery negative cable (2).
  8. Install the battery ground cable nut (1) and tighten to 9 N.m (80 lb in).
  9. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals