September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Air Cleaner Assembly Replacement
Courtesy of GENERAL MOTORS COMPANY Air Cleaner Assembly Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Disconnect the mass airflow sensor electrical connector.
- Remove the air cleaner inlet duct. Refer to Air Cleaner Inlet Duct Replacement .
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
|
| 1 |
Air Cleaner Assembly
Procedure
Remove the air cleaner assembly by pulling upward to release the assembly from the lower rubber grommets and then pulling outward from the fender. |