Windshield Outside Moisture Sensor Replacement

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Windshield Outside Moisture Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement (Encore) Windshield Outside Moisture Sensor Cover Replacement (Trax) . Disconnect the electrical connector at the top side of the windshield outside moisture sensor.
1	Windshield Outside Moisture Sensor Assembly Procedure Pinch the tabs on both outer edges of the windshield outside moisture sensor. Push the windshield outside moisture sensor upward from the windshield base. Remove the windshield outside moisture sensor from the vehicle.

Callout

Component Name

Preliminary Procedure

Remove the outside moisture sensor cover. Refer to Windshield Outside Moisture Sensor Cover Replacement (Encore) Windshield Outside Moisture Sensor Cover Replacement (Trax) .
Disconnect the electrical connector at the top side of the windshield outside moisture sensor.

Windshield Outside Moisture Sensor Assembly

Procedure

Pinch the tabs on both outer edges of the windshield outside moisture sensor.
Push the windshield outside moisture sensor upward from the windshield base.
Remove the windshield outside moisture sensor from the vehicle.