Fastener Specifications
WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Wheel Drive Intermediate Shaft Housing Bolts | 58 N.m | 43 lb ft |
| Transfer Case Adapter Plate-to-Transmission Bolts (1) (for Automatic Transmission) | ||
| First pass | 100 N.m | 74 lb ft |
| Second pass | 30-40 degrees | |
| Transfer Case Adapter Plate-to-Transmission Bolts (2) (for Automatic Transmission) | ||
| First pass | 60 N.m | 44 lb ft |
| Second pass | 60-75 degrees | |
| Transfer Case-to-Adapter Plate Bolts | ||
| First pass | 100 N.m | 74 lb ft |
| Second pass | 30-40 degrees | |
| Transfer Case Adapter Plate-to-Transmission Bolts (1) (for Manual Transmission) | ||
| First pass | 100 N.m | 74 lb ft |
| Second pass | 30-40 degrees | |
| Oil Fill Plug | 40 N.m | 30 lb ft |
| Oil Drain Plug | 40 N.m | 30 lb ft |
| Rear Extension Housing-to-Main Housing Bolts | ||
| First pass | 28 N.m | 21 lb ft |
| Second pass | 90 degrees | |
| Rear Output Shaft Housing-to-Main Housing Bolts | 40 N.m | 30 lb ft |
| Rear Output Flange Nut - Minimum torque - Tighten additional as required to obtain the correct rotating torque | 100 N.m | 74 lb ft |
| Rear Output Flange - Rotating Torque | 1.5-2.9 N.m | 13-26 lb in |
| Vent Hose Connector | 25 N.m | 18 lb ft |