LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Encore Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Frame And Underbody) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Drivetrain and Front Suspension Frame Bolt Center 145 N.m 107 lb ft
Drivetrain and Front Suspension Frame Bolt Front
  • First Pass
100 N.m 74 lb ft
  • Final Pass
+ 30 to 45 degrees
Drivetrain and Front Suspension Frame Bolt Rear
  • First Pass
160 N.m 118 lb ft
  • Final Pass
+ 30 to 45 degrees
Front Compartment Front Insulator Cover Bolt 22 N.m 16 lb ft
Front Compartment Front Insulator Cover Screw - Europe Only 2.5 N.m 22 lb in
Front Wheelhouse Liner Inner Front Extension Screw 3 N.m 27 lb in
Front Wheelhouse Liner Screw - Front 3 N.m 27 lb in
Front Wheelhouse Rear Liner Nut 3 N.m 27 lb in
Front Wheelhouse Rear Liner Screw 3 N.m 27 lb in
Power Steering Fluid Cooling Pipe Bolt, if equipped 9 N.m 80 lb in
Power Steering Inlet and Outlet Hose Bolt, if equipped 9 N.m 80 lb in
Rear Differential Carrier Bolt 108 N.m 80 lb ft
Rear Suspension Frame Bolt 100 N.m 74 lb ft
Rear Wheelhouse Panel Liner Nut 2 N.m 18 lb in
Rear Wheelhouse Panel Liner Screw 3 N.m 27 lb in
Transmission Protector Fastener 22 N.m 16 lb ft