LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Encore Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Programming And Setup - All Systems) >> Repair Instructions >> HVAC System Control Module Programming and Setup >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Ignition - On / Vehicle - In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module:K33 HVAC Control Module
  4. Perform the SPS function:Programming
scientia non olet · About LEMON Manuals