LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Wiring Harness Supply, Front Compartment Fuse Block And Electrical Connectors
    GM2191907Courtesy of GENERAL MOTORS COMPANY
  1. Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).
    2. CAUTION:

    Refer to Fastener Caution

  2. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in).
    3. Fig 2: Identifying Front Compartment Fuse Block Bolt
    GM2191908Courtesy of GENERAL MOTORS COMPANY
  3. Install 3 front compartment fuse block bolt (1) and tighten to 7.2 N.m (64 lb in).
    4. Fig 3: Front Compartment Fuse Block Housing Cover & Nuts
    GM2191905Courtesy of GENERAL MOTORS COMPANY
  4. Install the 3 power steering wiring harness nut (2) and tighten to 4.7 N.m (42 lb in).
  5. Close the front compartment fuse block housing cover (1)
  6. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement 
  7. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals