Installation Procedure
- Install the starter and generator positive cable to the vehicle.
- Install the generator positive cable (4) and the generator positive cable retaining nut (3) and tighten to 17 N.m (13 lb ft).
- Fold the generator cap (2) to the generator positive cable terminal.
- Install the starter ground cable (4) and the starter bolt (5) and tighten to 58 N.m (43 lb ft).
- Install the starter and generator positive cable (3) and the starter and generator positive cable nut (2) and tighten to 17 N.m (13 lb ft).
- Lower the vehicle.
- Clip in the starter and generator positive cable to the engine wiring harness and to the oil level indicator tube.
- Install the negative cable (2).
- Install the negative cable nut (1) and tighten to 9 N.m (80 lb in).
- Install the battery positive to starter cable (3) to the battery.
- Install and tighten the battery positive to starter cable nut (2).
- Close the battery fuse box cover and lock the retaining tabs (1) and (4).
- Install the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .