Front Fender Cover Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the body and windshield.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the hood hinge cover (see COWL COVER REPLACEMENT ).
Carefully insert a appropriate trim tool (A) next to the boss (B), and detach the boss and peel off the double-face adhesive tape (C) by prying on the front fender cover (D).
NOTE: Apply protective tape (E) to the body as shown.

Fig 1: Identifying Trim Tool, Boss, Double-Face Adhesive Tape And Front Fender Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the front fender cover in the reverse order of removal, and push the boss into place securely.