Charge Indicator Operation
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
The instrument panel cluster (IPC) illuminates the charge indicator in the message center when the one or more of the following occurs:
- The engine control module (ECM) detects that the generator output is less than 11 volts or greater than 16 volts. The IPC receives a serial data message from the ECM requesting illumination.
- The IPC determines that the system voltage is less than 11 volts or greater than 16 volts for more than 30 seconds. The IPC receives a serial data message from the body control module (BCM) indicating there is a system voltage range concern.
- The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
- The ignition is ON, with the engine OFF.