LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2013 >> Verano Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Bushing Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the NEW bushing to the tapered side of the control arm.
    2. Fig 1: Installing Control Arm Bushing
    GM851698Courtesy of GENERAL MOTORS CORP.
  2. Using the J 41211  , install the control arm bushing in the lower control arm. See Special Tools .
  3. Install the bushing to the same depth and orientation as noted during removal.
  4. Remove the J 41211  from the control arm. See Special Tools .
  5. Install the lower control arm. Refer to Lower Control Arm Replacement .
scientia non olet · About LEMON Manuals