K8 Blower Motor Control Module X2 Connector End View

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K8 Blower Motor Control Module X2 Connector End View

Courtesy of GENERAL MOTORS CORP.

K8 Blower Motor Control Module X2

Pin	Wire	Circuit	Function
1	4.0 RD	65	Blower Motor Supply Voltage
2	4.0 BK	5987	Front Blower Motor Low Reference

Connector Part Information

Harness Type: Blower Motor
OEM Connector: 15226103
Service Connector: 88988507
Description: 2-Way F Receptacle 6.3 Series (L-GY)

Terminal Part Information

Terminated Lead: Service by Harness - See Part Catalog
Release Tool: Not Available
Diagnostic Test Probe: Pending
Terminal/Tray: Service by Harness - See Part Catalog
Core/Insulation Crimp: Not Available