K9 Body Control Module X5 Connector End View

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K9 Body Control Module X5 Connector End View

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X5

Pin	Color	Circuit	Function
1	0.75 D-BU/WH	1334	Left Rear Turn Signal Lamp Supply Voltage
2	0.75 D-BU/WH	1314	Left Front Turn Signal Lamp Supply Voltage
3	1.50 GY/VT	691	Headlamp Low Beam Relay Control
4	2.5 D-GN/GY	9	Park Lamp Supply Voltage
5	-	-	Not Used
6	0.5 BK/VT	5077	Low Reference
7	0.5 WH/YE	7541	Right Rear Stop Lamp Supply Voltage
8-9	-	-	Not Used
10	0.5 BN/WH	1317	Fog Lamp Relay Control
11	0.5 GY/YE	6188	Lift Glass/Trunk Motor Release Control
12	0.5 WH/D-BU	6311	Cruise/ETC/TCC Brake Signal
13	-	-	Not Used
14	0.5 VT/BN	1541	Run Ignition 3 Voltage
15-17	-	-	Not Used
18	0.5 BN/VT	1969	Headlamp High Beam Relay Control
19	0.5 BN/WH	28	Horn Relay Control
20-23	-	-	Not Used
24	0.5 WH/VT	860	Front Windshield Wiper Switch High Signal
25-26	-	-	Not Used

Connector Part Information

Harness Type: Body
OEM Connector: 13277342
Service Connector: 13317831
Description: 26-Way F 64 Series (BN)

Terminal Part Information

Pins: 1-3
Terminated Lead: Pending
Release Tool: 12094429
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A061T-M2.8/20
Core/Insulation Crimp: E/A

Pins: 4
Terminated Lead: Pending
Release Tool: 12094429
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A081T-M2.8/20
Core/Insulation Crimp: A/D

Pins: 6, 7, 10-12, 14, 18, 19, 24
Terminated Lead: Pending
Release Tool: 12094429
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SNAC3-A021T-M0.64/20
Core/Insulation Crimp: J/J