K9 Body Control Module X6 Connector End View

WARNING: This page is about a different car, the 2011 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: K9 Body Control Module X6 Connector End View

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X6

Pin	Color	Circuit	Function
1	0.75 GY	5911	Door Lock Actuator Lock Control 2
2	0.75 WH/RD	295	Door Lock Actuator Lock Control
3	2.5 BK	1550	Ground
4	0.75 BN/YE	294	Door Lock Actuator Unlock Control
5	0.5 VT/GY	1303	Lift Gate Ajar Switch Signal (1)
6	-	-	Not Used
7	0.5 YE	6817	LED Backlight Dimming Control
8	-	-	Not Used
9	0.5 D-GN/WH	6133	Linear Interconnect Network Bus 2
10	0.5 D-GN/WH	6134	Linear Interconnect Network Bus 3
11-14	-	-	Not Used
15	0.5 YE/D-BU	5797	Rear Closure Handle Switch Open Signal
16	0.5 BN	6132	Linear Interconnect Network Bus 1 (CF5)
17-23	-	-	Not Used
24	0.5 D-BU	2500	High Speed GMLAN Serial Data (+) (1)
25	0.5 WH	2501	High Speed GMLAN Serial Data (-) (1)
26-27	-	-	Not Used

Connector Part Information

Harness Type: Body
OEM Connector: 13277345
Service Connector: 13317828
Description: 27-Way F 64 Series (PK)

Terminal Part Information

Pins: 1, 2, 4
Terminated Lead: Pending
Release Tool: 12094429
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A061T-M2.8/20
Core/Insulation Crimp: E/A

Pins: 3
Terminated Lead: Pending
Release Tool: 12094429
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A081T-M2.8/20
Core/Insulation Crimp: A/D

Pins: 5, 7-10, 15, 24, 25
Terminated Lead: Pending
Release Tool: 12094429
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SNAC3-A031T-M0.64/20
Core/Insulation Crimp: J/J