Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

Remove the battery tray. Refer to Battery Tray Replacement .
Without disconnecting the brake pipes, remove the electronic brake control module (EBCM) with the brake pressure modulator valve (BPMV) and bracket as an assembly. Refer to Brake Pressure Modulator Valve Replacement .
Carefully position aside the assembly and secure with heavy mechanics wire.

Fig 1: EBCM Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the EBCM bolts (1),

Fig 2: Electronic Brake Control Module

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Do not pry the components apart.

Carefully separate the EBCM (1) from the BPMV.
Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.