Rear Vision Camera System Operation

The rear vision camera system consists of a video camera located at the rear of the vehicle and the radio.

When the transmission is placed into REVERSE, a 12 volt signal is sent to the radio. This signal indicates to the radio that the vehicle is in reverse and image display is requested. The rearview camera receives ignition voltage and a constant ground to power the camera from the radio. Video signal + and video signal - circuits carry the video image from the rearview camera to the radio. Additionally, the video signal circuits are shielded to prevent any interference which may lead to a loss of video signal resolution and a degraded video image. The shield is provided a ground path by the rear vision camera.

The following conditions may cause a degraded rear vision camera image:

• Ice, snow, or mud has built up on the rear vision camera
• Dark conditions
• Extreme light conditions, such as glare from the sun or the headlights of another vehicle
• Damage to the rear of the vehicle
• Extreme high temperatures or extreme temperature changes

If a malfunction is detected in the system, Service Rear Vision Camera may be displayed on the radio as an indicator to the customer that a problem exists that requires service.