Calibration Procedure

To complete the battery sensor module calibration, there must be no significant parasitic electrical drain on the battery. If the parasitic electrical drain does not remain below 100 mA for a 10 minute period during vehicle rest, the calibration will not be completed successfully. Refer to Battery Electrical Drain/Parasitic Load Test  to correct any parasitic electrical drains.

If not diagnosing a Stop/Start concern and the negative battery cable was disconnected and reconnected, this procedure is not required. Inform the customer that the Stop/Start feature will not be available until the vehicle is allowed to sit for at least 3 hours undisturbed.