LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Encore Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Programming And Setup - All Systems) >> Repair Instructions >> Front View Camera Module Programming and Setup >> Front View Camera Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front View Camera Module Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

If the Front View Camera Module needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access Service Programming System (SPS).
  2. Perform the SPS function Front View Camera Module - Programming and follow the on-screen instructions.
  3. Perform the SPS function Front View Camera Module - Configuration & Setup and follow the on-screen instructions.
  4. Clear DTCs after completing the programming procedure.
  5. Following programming, the module will require calibration. Refer to Front View Camera Module Calibration .
scientia non olet · About LEMON Manuals