Unsuccessful Programming Recovery
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an interrupted or unsuccessful programming event, perform the following steps:
- Ignition ON. Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
- Verify the K47 Rear Differential Clutch Control Module can be reprogrammed.
- If the K47 Rear Differential Clutch Control Module cannot be reprogrammed
- Ignition OFF for 1 min, ignition ON.
- Verify the K47 Rear Differential Clutch Control Module can be reprogrammed.
- If the control module cannot be reprogrammed, replace the K47 Rear Differential Clutch Control Module.
- If the control module can be reprogrammed.
- All OK.
- If the K47 Rear Differential Clutch Control Module can be reprogrammed
- All OK.