LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 2016 >> Envision >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> DTC B1024: Circuit Board Temperature Sensor Above Maximum Threshold (Audio Amplifier) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Allow the vehicle cabin to cool if the temperature inside the vehicle is excessive before proceeding with this diagnostic procedure.

  1. Verify the DTC sets outside of the Conditions for Running and Setting. Since most occurrences of this DTC are caused by extreme vehicle cabin temperatures due to ambient conditions, review with the customer the conditions under which the DTC set.
    • If the DTC sets within the Conditions for Running and Setting. 

      The system is operating as designed, All OK.

    • If the DTC sets outside the Conditions for Running and Setting. 
  2. Using the scan tool, clear the DTC.
  3. Verify the DTC does not set while operating the infotainment system under the conditions the customer experienced the concern.
    • If the DTC sets 

      Replace the T3 Audio Amplifier

    • If the DTC does not set 
  4. All OK.
scientia non olet · About LEMON Manuals