Circuit/System Verification
WARNING: This page is about a different car, the 2015 Buick LaCrosse. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that DTC C0569 3A is not set.
- The DTC is set
- Program the K43 Power Steering Control Module. Refer to Power Steering Control Module Programming and Setup (NJ1) .
- Verify the DTC does not reset.
- If the DTC resets, replace the K43 Power Steering Control Module.
- If the DTC does not reset
- All OK.
- The DTC is not set
- All OK.