Circuit/System Verification
- Ignition ON, clear the DTC information with a scan tool.
- Verify no other DTCs are set.
- If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle for further diagnosis.
- If no other DTCs are set
- If any other DTCs are set
- Verify DTC P0602 or P0630 is not set.
- If any of the DTCs are set
- Program the K20 Engine Control Module. Refer to Control Module References .
- Verify DTC P0602 or P0630 is not set.
- If any of the DTCs are set, replace the K20 Engine Control Module.
- If none of the DTCs are set
- All OK.
- If none of the DTCs are set
- Verify DTC P0601, P0603, P0604, P0606, P062B, P062F, P16F3, or P262B is not set.
- If any of the DTCs are set
Replace the K20 Engine Control Module.
- If none of the DTCs are set
- If any of the DTCs are set
- All OK.