Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

1. Ignition ON. Ensure the parking assist control module, DLC and programming tool connections are secure and the SPS software is up to date.
2. Verify the parking assist control module can be reprogrammed.
   • If the parking assist control module cannot be reprogrammed 
   1. Ignition OFF for one minute, ignition ON.
   2. Verify the parking assist control module can be reprogrammed.
      • If the parking assist control module cannot be reprogrammed, replace the parking assist control module.
      • If the parking assist control module can be reprogrammed.
   3. All OK.
   • If the parking assist control module can be reprogrammed 
3. All OK.