Circuit/System Verification
- Ignition ON.
- Verify that DTC B1405 is not set.
- If the DTC is set
Refer to DTC B1405
- If the DTC is not set
- If the DTC is set
- Verify that DTC B0954 01, B0955 01, B0956 01, B0957 01 B0954 21, B0955 21, B0956 21 or B0957 21 is not set.
- If the DTC is set
- Verify the B78 Front Object Sensors are not contaminated with snow, mud, dirt, slush, or ice.
- If contaminated, clean sensor.
- If there is no contamination
- Refer to Circuit/System Testing.
- If the DTC is not set
- Verify that DTC B0954 3A, B0955 3A, B0956 3A or B0957 3A is not set.
- If the DTC is set
Replace the B78 Front Object Sensor with the correct sensor type.
- If the DTC is not set
- If the DTC is set
- Ignition ON, transmission in REVERSE.
- Verify the scan tool Parking Assist System Status parameter displays Enabled.
- If the Parking Assist System displays Disabled
Refer to Circuit/System Testing.
- If the Parking Assist System displays Enabled
- If the Parking Assist System displays Disabled
- All OK.