Circuit/System Verification
- Ignition ON.
- Verify DTC B1405 is not set.
- If the DTC is set
Refer to DTC B1405
- If the DTC is not set
- If the DTC is set
- Verify DTC B095D 01, B095E 01, B095D 21, or B095E 21 is not set.
- If any of the DTCs are set
- Verify none of the B94 Side Object Sensors - Rear are contaminated with snow, mud, dirt, slush, or ice.
- If contaminated, clean the B94 Side Object Sensors - Rear.
- If there is no contamination.
- Refer to Circuit/System Testing.
- If none of the DTCs are set
- Verify that DTC B095D 3A or B095E 3A is not set.
- If any of the DTCs are set
Replace the appropriate B94 Side Object Sensor - Rear with the correct sensor type.
- If none of the DTCs are set
- If any of the DTCs are set
- Ignition ON.
- Verify the scan tool Parking Assist System Status parameter is Enabled.
- If the Parking Assist System Status parameter is Disabled
Refer to Circuit/System Testing.
- If the Parking Assist System Status parameter is Enabled
- If the Parking Assist System Status parameter is Disabled
- All OK.