Circuit/System Verification
- Ignition ON.
- Verify that DTC B1405 is not present.
- If the DTC is set
Refer to DTC B1405
- If the DTC does not set
- If the DTC is set
- Verify that DTC B096C 01 or B096D 01 is not present.
- If the DTC is set
Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC is set
- Verify that DTC B096C 3A or B096D 3A is not present.
- If the DTC is set
Replace the appropriate sensor with a sensor by correct sensor type.
- If the DTC does not set
- If the DTC is set
- Verify that DTC B096C 21 or B096D 21 is not present.
- If the DTC is set
Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, replace the appropriate sensor.
- If the DTC does not set
- If the DTC is set
- All OK.