Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Fuse Block @ Battery Positive Post Fastener | 4.5 N.m (40 lb in) |
| Battery Negative Cable @ Battery Sensor Stud Fastener | 12 N.m (106 lb in) |
| Battery Negative Cable Clamp @ Negative Battery Post Fastener | 4.5 N.m (40 lb in) |
| Battery Negative Cable Ground Terminal @ Engine Block Fastener (LCV, LTG) | 40 N.m (30 lb ft) |
| Battery Negative Cable Ground @ Radiator Support Fastener | 22 N.m (16 lb ft) |
| Battery Negative Cable Ground Terminal @ Upper Tie Bar Support Stud Fastener (LCV, LTG) | 22 N.m (16 lb ft) |
| Battery Positive Cable @ Battery Fuse Block Fastener | 12 N.m (106 lb in) |
| Battery Positive Cable @ Generator Fastener (LCV, LTG) | 15 N.m (11 lb ft) |
| Battery Positive Cable @ Starter Solenoid Fastener (LCV, LTG) | 12 N.m (106 lb in) |
| Battery Positive Junction Block Cable Fastener | 12 N.m (106 lb in) |
| Battery Retaining Bracket Fastener | 9 N.m (80 lb in) |
| Battery Tray Fastener | 22 N.m (16 lb in) |
| Engine Wiring Harness Junction Block Cable Fastener | 12 N.m (106 lb in) |
| Fuse Block Bolt (Engine Wiring Harness Junction Block) | 7 N.m (62 lb in) |
| Generator Mounting Bolt (LCV, LTG) | 22 N.m (16 lb in) |
| Generator Mounting Nut (LCV, LTG) | 22 N.m (16 lb in) |
| Generator Mounting Stud (LCV, LTG) | 9 N.m (80 lb in) |
| Starter Mounting Bolt (LCV, LTG) | 22 N.m (16 lb in) |