Component Test

Static Test

1. Ignition OFF, disconnect the harness connector at the S48A Multifunction Switch - Instrument Panel.
2. Test for infinite resistance between the control circuit terminal 6 and ground circuit terminal 7.
   • If less than infinite resistance 

     Replace the S48A Multifunction Switch - Instrument Panel.

   • If infinite resistance 
3. Test for less than 10 Ω between the control circuit terminal 6 and ground circuit terminal 7 while pressing the lane departure warning switch.
   • If 10 Ω or greater 

     Replace the S48A Multifunction Switch - Instrument Panel.

   • If less than 10 Ω 
4. All OK.