Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Exhaust Front Pipe Gasket |
| Exhaust Manifold Gasket |
| Exhaust Muffler Gasket |
| Three Way Catalytic Converter Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drive Frame Bolt - M10 | |
|
60 N.m (44 lb ft) |
|
30 - 45 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Insulator Nut | 22 N.m (16 lb ft) |
| Catalytic Converter to the Exhaust Muffler Nut | 28 N.m (21 lb ft) |
| Catalytic Converter to the Three Way Catalytic Converter Nut | 28 N.m (21 lb ft) |
| Exhaust Front Pipe Hanger Bracket Bolt M8 | 22 N.m (16 lb ft) |
| Exhaust Hanger Bolt | 22 N.m (16 lb ft) |
| Exhaust Manifold Heat Shield Bolt | 10 N.m (89 lb in) |
| Exhaust Manifold Nut | 14 N.m (124 lb in) |
| Exhaust Pipe Clamp | 30 N.m (22 lb ft) |
| Exhaust Rear Auxiliary Muffler Bracket Bolt | 25 N.m (18 lb ft) |
| Exhaust System to Catalytic Converter Nut | 22 N.m (16 lb ft) |
| Three Way Catalytic Converter Brace Bracket Bolt | 58 N.m (43 lb ft) |
| Three Way Catalytic Converter Nut | 28 N.m (21 lb ft) |