Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve - Front and Rear | 13 N.m (115 lb in) |
| Brake Caliper Bracket Bolt - Front and Rear | 175 N.m (129 lb ft) |
| Brake Caliper Guide Pin Bolt* - Front | 64 N.m (47 lb ft) |
| Brake Caliper Guide Pin Bolt* - Rear | 27 N.m (20 lb ft) |
| Brake Hose Fitting Bolt - Front | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Rear | 50 N.m (37 lb ft) |
| Brake Rotor Bolt - Front and Rear | 12 N.m (106 lb in) |
| *Tighten the bolt closest to the bleeder valve first. | |