Component Testing
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the passenger window motor.
- Install a 25A fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The passenger window motor should perform the UP or DOWN function.
- If the function does not perform as specified, replace the passenger window motor.
- Reverse the jumper wires; the passenger window motor should perform the DOWN or UP function.
- If the function does not perform as specified, replace the passenger window motor.